BSD-FFP35DMK2-4
Servo motor
- 400 VAC, 3.5 kW
- 180mm flange, 35mm shaft, 16.70/50.10Nm, 2000/3000rpm
- Absolute 19 bit multi turn encoder (524288 ppr)
- Medium inertia
- Brake
Facts
General description
| Article number | 71265 |
| Warranty | 1 year |
| Applicable drive | L7xB035-4 |
Mechanical
| Inertia | 46.56 kg•cm² |
| Flange size | 180 mm |
| Shaft diameter | 35 mm |
| Shaft type | Keyed |
| Maximum shaft axial force | 1548 N |
| Maximum shaft radial force | 519 N |
| IP Class | IP65 (exkluding shaft penetration) |
| Weight | 24.6 kg |
Ambient conditions
| Environment | Avoid direct sunlight, no corrossive gas, inflammable gas, oil mist or dust |
| Humidity | 90% RH or less (no condensation) |
| Temperature range | Operating: 0 to 40 C°, Storage: -10 to +60 C° |
| Vibration | 5G |
Brake
| Holding brake | Yes |
| Holding torque | 40 Nm |
| Brake coil voltage | 24 VDC |
| Brake coil current | 1.04 A |
Encoder
| Encoder type | Absolute multi-turn 19bit (524288ppr) |
Output ratings
| Rated power | 3.5 kW |
| Rated speed | 2000 rpm |
| Rated torque | 16.70 Nm |
| Maximum torque | 50.1 Nm |
Tuning
| Allowed load inertia ratio | 5 times motor inertia |
Standard compliances
| Applied directives | EMC Directive: EN 60034-1:2010 Low Voltage Directive: EN 60034-5:2001 + A1:2007 |
