BSD-FAL01AM8N2-2
Servo motor
- 230 VAC, 100 W
- 40mm flange, 8mm shaft, 0.32/0.96Nm, 3000/5000rpm
- Absolute 18 bit multi turn encoder (262144 ppr)
- Low inertia
- Brake
Facts
General description
Article number | 71171 |
Warranty | 1 year |
Applicable drive | L7xA001-2 |
Mechanical
Inertia | 0.0023 kg•cm² |
Flange size | 40 mm |
Shaft diameter | 8 mm |
Shaft type | Smooth |
Maximum shaft axial force | 39 N |
Maximum shaft radial force | 148 N |
IP Class | IP65 (exkluding shaft penetration) |
Weight | 0.45 kg |
Ambient conditions
Environment | Avoid direct sunlight, no corrossive gas, inflammable gas, oil mist or dust |
Humidity | 90% RH or less (no condensation) |
Temperature range | Operating: 0 to 40 C°, Storage: -10 to +60 C° |
Vibration | 5G |
Brake
Holding brake | Yes |
Holding torque | 0.32 Nm |
Brake coil voltage | 24 VDC |
Brake coil current | 0.25 A |
Encoder
Encoder type | Absolute multi-turn 18bit (262144ppr) |
Output ratings
Rated power | 100 W |
Rated speed | 3000 rpm |
Rated torque | 0.32 Nm |
Maximum torque | 0.96 Nm |
Tuning
Allowed load inertia ratio | 30 times motor inertia |
Standard compliances
Applied directives | EMC Directive: EN 60034-1:2010 Low Voltage Directive: EN 60034-5:2001 + A1:2007 |
Resources
Drawings
- CAD drawing of BSD-FCL08AMK2-2 with brake (pdf, dwg, step)
- Drawings: EMC-filter TB6-B010LBEI (pdf)
- CAD drawing of BSD-FCL08AMK-2 (pdf, dwg, step)
- CAD drawing of BSD-FBL04AMK2-2 with brake (pdf, dwg, step)
- CAD drawing of BSD-FBL04AMK-2 (pdf, dwg, step)
- CAD drawing of BSD-FBL02AMK2-2 with brake (pdf, dwg, step)
- CAD drawing of BSD-FBL02AMK-2 (pdf, dwg, step)
- CAD drawing of BSD-FAL01AM8N2-2 with brake (pdf, dwg, step)
- CAD drawing of BSD-FAL01AM8N-2 (pdf, dwg, step)