BSD-FCL08AMK-2

Servo motor

  • 230 VAC, 800 W
  • 80mm flange, 19mm shaft, 2.39/7.16Nm, 3000/5000rpm
  • Absolute 19 bit multi turn encoder (524288 ppr)
  • Low inertia

Facts

General description

Article number 71134
Warranty 1 year
Applicable drive L7xA010-2

Mechanical

Inertia 1.264 kg•cm²
Flange size 80 mm
Shaft diameter 19 mm
Shaft type Keyed
Maximum shaft axial force 255 N
Maximum shaft radial force 98 N
IP Class IP65 (exkluding shaft penetration)
Weight 2.68 kg

Ambient conditions

Environment Avoid direct sunlight, no corrossive gas, inflammable gas, oil mist or dust
Humidity 90% RH or less (no condensation)
Temperature range Operating: 0 to 40 C°, Storage: -10 to +60 C°
Vibration 5G

Brake

Holding brake No
Holding torque 3.23 Nm
Brake coil voltage 24 VDC
Brake coil current 0.38 A

Encoder

Encoder type Absolute multi-turn 19bit (524288ppr)

Output ratings

Rated power 800 W
Rated speed 3000 rpm
Rated torque 2.39 Nm
Maximum torque 7.16 Nm

Tuning

Allowed load inertia ratio 20 times motor inertia

Standard compliances

Applied directives EMC Directive: EN 60034-1:2010 Low Voltage Directive: EN 60034-5:2001 + A1:2007

Resources

Drawings