BFI-P2-22-0070-3F4B-MN
Article number 60392
- Output power 1.5 kW
- Output 3×230 VAC, 7.0 A
- Input voltage 3×200-240 VAC
- IP66
Facts
General description
Article number | 60392 |
Warranty | 2 year |
Mechanical
IP class | IP66 |
Physical size | Size 2 |
Measurements (H x W x D) | 257 mm x 188 mm x 239 mm |
Weight | 4,4 kg |
Typical power loss at rated power | 2 % of rated power |
Main switch | Yes |
Built in Main switch, control switch and potentiometer | Yes |
Conformal coated PCBs | Yes, IEC 60721-3-3, 3S3/3C3 |
Output ratings
Output voltage | 3 x 230 VAC |
Rated motor current | 7.0 A |
Overload capacity | 150% for 60 seconds, 200% for 4 seconds |
Motor power | 1.5 kW |
Output frequency | 0 – 500Hz, 0.1Hz resolution |
Supported motor types | 3 phase AC induction (IM), AC permanent magnet (PM), Brushless DC (BLDC), Synchronous reluctance (SynRM) |
Built-in brake transistor | Yes |
Regenerative capacity | 100 % ED |
Input ratings
Supply voltage | 200 – 240VAC ± 10% |
Voltage fluctuations | +/- 10% |
Phase imbalance | 3% maximum allowed |
Displacement factor | > 0.98 |
Supply frequency | 48 – 62Hz |
Power cycles | 120 per hour maximum, evenly spaced |
Control specification
Control modes | V/F Voltage Vector, Energy Optimised V/F, Sensorless Vector Speed Control, Sensorless Vector Torque Control, Synchronous Reluctance Motor Control, Brushless DC Motor Control, Closed Loop (Encoder) Speed Control, Closed Loop (Encoder) Torque Control, Open Loop PM Vector Control |
Current/torque limitation | Torque and current limitation |
PWM frquency | 4-32 kHz effective |
Stopping mode | Ramp to Stop: User Adjustable 0.01 – 600 seconds, Fast stop, Coast to Stop |
Braking | Motor Flux Braking, Built-in Braking Transistor |
Skip frequency | Yes |
Analog setpoint control | 0 to 10V, 10 to 0V, −10 to 10V, 0 to 20mA, 20 to 0mA, 4 to 20mA, 20 to 4mA |
Digital setpoint control | 8 fixed speeds, Motorised Potentiometer, Internal PLC, Keypad, Modbus RTU, CANopen, Optional: PROFIBUS DP, DeviceNet, EtherNet/IP, EtherCat, PROFINET, Modbus TCP, CC-Link |
Communication
Modbus RTU | Yes, 9.6 – 115.2 kbps (8N1, 8N2, 8E1, 8O1) |
BACnet MS/TP | No |
Modbus TCP | Yes, external option |
Ethernet IP | Yes, external option |
EtherCat | Yes, external option |
Profinet IO | Yes, external option |
Profibus DP(DPV1) | Yes, external option |
Device Net | Yes, external option |
CC-Link | Yes, external option |
CAN open | Yes, 125-1000 kbps |
Display
Programmable display | Yes |
Multi language OLED display | TFT Display |
External OLED display | Yes, TFT Display |
LED display | No |
HVAC
PID-control | Yes with sleep/wake up functionality |
Spin start | Yes |
Pump dry protection | No |
Pump prime and burst protection | No |
Stir function | No |
Motor pre-heat | No |
Broken impeller and broken belt detection | No |
Automatic cleaning for pumps | No |
Bypass control | Yes |
Fire mode | No |
Control terminals
Power supply | 100 mA @ 24 VDC, 20 mA @ 10 VDC |
Inputs | 5 in total, 3 Digital, 2 Analog or Digital, selectable |
Digital inputs | 10-30 V DC, PNP, Response time: < 4 msec, Internal or external supply |
Analog inputs | Resolution:12 bit, Response time: <4 msec; Accuracy: <± 2% of full scale, Adjustable scaling |
Outputs | 4 total, 2 relays, 2 analog or digital |
Digital transistor outputs | 24VDC/20 mA, Internal supply |
Relay outputs | Maximum Voltage: 250 VAC, 30 VDC Switching Current Capacity: 5A AC, 5A DC |
Analog outputs | 0 to 10 Volt, 0 to 20mA, 4 to 20mA |
Safety inputs | 2 |
Extra IOs | Yes, internal option |
Control features
Speed control Master/slave | Yes, Master and slave |
Modbus master functionality | Yes, Master and slave |
Advanced hoist control | Yes |
Built-in PLC | Yes |
Standard compliances
Low voltage directive | 2014/35/EU |
EMC directive | 2014/30/EU |
Conformance | CE, UL, cUL |
Machine directive | 2006/42/EC |
Marine approvals | No |
Safe torque OFF | Cat 3/PL”d” According to ISO 13849-1, SIL CL 2 According to EN61800-5-2 / EN62061 / IEC61508 |
Restriction of hazardous substances | RoHS2 |
Registration evaluation and authorisation of chemicals | Reach |
Earth leakage current | EN 61800-5-1: 2007. Test techniques EN 60990:2000. 1×230 VA < 2,5 mA, 3x400VAC < 4,65 during runing |
DC Bus discharge time | EN 61800-5-1:2007 |
Electrostatic discharge | EN 61800-3:2004+A1-2012. Test techniques EN 61000-4-2:2009. |
Dielectric strength | 61800-5-1: 2007 |
Surge | EN 61800-3: 2004+A1-2012. Test techniques EN 61000-4-5:2006. |
Electrical fast transient burst | EN 61800-3: 2004+A1-2012. Test techniques EN 61000-4-4:2004. |
Ambient conditions
Temperature operation | -10 to 40 °C |
Humidity | 95% max, non-condensing |
Maintenance
Fault memory | Last 4 Trips stored with time stamp |
Data logging | Logging of data prior to trip, Current, Temperature, DC Bus Voltage |
Maintenence indicator | Yes. Onboard service life monitoring |
Monitoring | Hours Run Meter, kWh/MWh meter |
Smart Engineering Resources
Resources
Knowledge
- Alarm, Excessive DC rippel
- Alarm code running single phase motor with 3-phase output BFI
- 24 VAC connected to terminal 1 will damaged the drive
- Cooling fans in the BFI-P2
- Input Phase Loss Detection
- Alarm, INHIBIT
- Application note BFI-P2, Using The Display Scaling Function
- Application note BFI-P2, Use of Drive on generator supplies
- Alternate between EtherNet control and Digital/analog
- Overcurrent trip
- Main switch in BFI-P2
- OLED Remote External Keypad, Working with Multiple Drive Networks
- Profibus contacts for BFI-P2 and BFI-H3
- Power consumption in standby
- Single phase motors run by BFI-E3/H3/P2
- Fans, external cooling fans
- PID-control. Scaling of actual processvalue in display and unit
- Automatic heating of BFI-P2 when temperatur is below -10 degree Celsius
- Modbus RTU and Modbus TCP communication at the same time
- Encoder feedback
- Thermal protection inside motor connected to BFI-E3/P2/H3
- BFI as DC / AC Converter
- Application note BFI-P2, Selecting the Start – Restart Mode
- Application note BFI-P2, Scaling of displayed value
- Application note BFI-P2, Remote Push-button Speed Control
- Application note BFI-P2, Programming the Drive User Relays
- Application note BFI-P2, Permanent Magnet and Brushless DC Motor Control
- Application note BFI-P2, Mounting Drives in control panels
- Application Note: BFI-P2, Modifying the Constant V-F Output characteristic
- Application note BFI-P2, Master Slave Network Operation
- Application note BFI-P2, Hoist Applications
- Application note BFI-P2, High Frequency Firmware
- Application note BFI-P2, Fan components in Drive construction
- Application note BFI-P2, Encoder-less Vector Control for 3 Phase Induction Motors
- Application note BFI-P2, Displaying Motor Speed in rpm
- Application note BFI-P2, Setting Required Stopping Mode
- Application note BFI-P2, Locking Parameters to Prevent Changes
- Application note BFI-P2, Setting Motor nameplate Details
- Application note BFI-P2, Skip Frequency function
- Application note BFI-P2, Using Multiple Motor in Parallel
- CC-Link communication
- BFI cable connectors fork type
- BFI p2 e3 h3 hand control manual control
Drawings
- Cable CAB155: Cable for CANopen between any product and BFI
- Cable CAB154: Cable for CANopen between X2 Control and BFI
- Cable CAB114: Cable for ModBus RS485 between Nexto Xpress and BFI
- Cable CAB113: Cable for ModBus RS485 between X2 panel and BFI
- Mechanical drawings: BFI-P2, STEP-files
- Mechanical drawings BFI-P2, (*.pdf and *.dxf)
- BFI connection into Modbus RTU or CANopen network
Certificates
- Manufacture Declaration for US and Canada
- Manufacturer declaration: BFI-P2 DNV Marine Approval
- Manufacturer declaration: BFI-P2 CE Declaration of Conformity
- Conflict Minerals Policy Statement
- Ecodesign for BFI Frequency Inverters
- Modern Slavery Act Company Statement
- RoHS 3, Restriction of Hazardous Substances. September 2021.
- REACH Directive Compliance Statement, September 2021
- Manufacturer declaration: BFI-P2 UKCA Declaration of Conformity
- Manufacturer declaration: UKCA Declaration of Conformity, Options for BFI
- Manufacturer declaration: CE Declaration of Conformity, Options for BFI
Data sheets
- Datasheet: Input AC Line chokes to BFI
- Datasheet: Sine wave filter
- Datasheet: Output chokes for BFI
- Datasheet: External EMC-filters for BFI
- Datasheet: Extra IO by CanOpen to BFI-P2, OPT-2-CANIO-BFI
- Datablad Externt bromsmotstånd till BFI-E3 och BFI-P2.
- Datablad Extern parameterenhet OPT-2-OPPAD-BFI
- Datablad Kablage för Modbus RTU mot BFI
- Datasheet Isolator switch option for BFI-P2 IP55
- Specification of all BFI, Functions/Hardware
- Datasheet Additional option board with 3 additional realy outputs
- Datasheet Additional option board with 3 digital inputs and one relay output
Brochures
Program examples/Start-up
- Program example BCS Tools and iX: Nexto communication with BFI by EtherCAT
- Program example iX Developer: Modbus TCP communication between any X2 and BFI-P2/H3.
- Program example iX Developer: Modbus RTU communication between any X2 and BFI-E3, BFI-P2 or BFI-H3.
- Program example CODESYS and iX: X2 Control communication with BFI-P2/BFI-H3 by Modbus TCP
- Program example CODESYS and iX: X2 Control communication with BFI by Modbus RTU
- Program example CODESYS and iX: X2 Control communication with BFI by EtherCat
- Program example BCS Tools and iX: Nexto Xpress communication with BFI by Modbus TCP
- Program example BCS Tools and iX: Nexto Xpress communication with BFI by Modbus RTU.
- Program example BCS Tools and iX: Nexto Xpress communication with BFI by CANopen
- Program example CODESYS and iX: X2 Control communication with BFI by CANopen
Manuals
- Manual Modbus RTU 485-communication
- Manual Performance Inverter BFI-P2 (english) , version 3.04
- Manual Profibus DP BFI-P2 and BFI-H3
- Encoder Feedback BFI-P2
- Manual CanOpen BFI-P2
- Manual BFI-Tools, PC-software for BFI
- Manual BFI-Smartstick for programming by Bluetooth
- Kom-Igång dokument BFI-P2 Swedish
- Start-Up-Document BFI-P2, Performance Inverter (English KI00306C )
Software
Configuration files
- Configuration file Profibus DP (gsd) for BFI-H3 and BFI-P2.
- Configuration file EtherCat (xml) for BFI-H3 and BFI-P2.
- Configuration file DeviceNet (eds) for BFI-H3 and BFI-P2
- Configuration files CanOpen (eds) for BFI-P2 and BFI-E3.
- Configuration file Profinet (xml) for BFI-H3 and BFI-P2
- Configuration file Ethernet IP (eds) for BFI-P2 and BFI-H3