GN-9289

Network adapter

  • Modbus TCP slave / Ethernet/IP
  • 2 x Ethernet 10/100Mbps
  • Up to 63 expansion slices
  • Built-in Ethernet switch
  • 10pt removable terminal block

Facts

General description

Article number 100-8015
Warranty 2 year
Article status Active
Shock operating IEC 60068-2-27 (15G)
Vibration resistence Sine vibration (based on IEC 60068-2-6), 5 ~ 25Hz: ±1.6mm, 25 ~ 300Hz: 4G, Sweep rate: 1 octave/min., 20 cycles, Random vibration (based on IEC 60068-2-64), 10 ~ 40Hz: 0.0125g²/Hz, 40 ~ 100Hz: 0.0125 → 0.002g²/Hz, 100 ~ 500Hz: 0.002 g²/Hz, 500 ~ 2000Hz: 0.002 → 1.3 x 10-4g²/Hz, Test time: 1hrs for each test
Industrial emissions EN 61000-6-4/A11: 2011
Industrial immunity EN 61000-6-2:2005
Horisontal, Vertical
Product certifications CE, UL, FCC, RoHS, China RoHS, Reach
System power Nominal supply voltage: 24VDC, Voltage range: 60℃: 18~32VDC, 70℃: 18~26.4VDC, Output current limitation: 1.5A, Reverse polarity protection
Power dissipation Max. 70mA @ 24VDC
Current for IO module 1.5A @ 5VDC
Isolation System power to internal logic: Non-Isolation , System power I/O driver: Isolation
Field power Nominal supply voltage: 24VDC, Voltage range: 60℃: 18~32VDC, 70℃: 18~26.4VDC, * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification.
Max current field power contact DC 10A max
Weight 165g
Module size 54x99x70mm

Communication

Station type Slave
Max expansion ports 63 slices
IO data size Input 128bytes / Output 128bytes
Max length bus line 100 m
Max network nodes Limited by Ethernet Specification
Baud rate 100Mbps, Auto-negotiation, Full duplex
Settable node address IP-address
Bus connection 2 x RJ45
Other serial port RS232 for MODBUS RTU
Serial configuration Node: 1 (Fixed), Baud Rate: 115200 (Fixed), Data bit: 8 (Fixed), Parity bit: No parity (Fixed), Stop bit: 1 (Fixed)
Indicator 6 LEDs, 1 Green/Red, Module Status (MOD), 1 Green, Physical Connection (DLINK), 1 Green, Exchange Data/Traffic Present (RUN/ERR), 1 Green/Red, Expansion I/O Module Statsus (IOS), 1 Green, System Power Status, 1 Green, Field Power Status, , 2 LEDs (each RJ45 Connector), 1 Yellow, Link/Active, 1 Green, Not used
Module location Starter module left side
Field power detection ~14VDC

Environmental

Mounting 35mm DIN rail
Operating temperature -40 ~ 70℃, Degraded performance > 60℃
Storage temperature -40 ~ 85℃
UL temperature -20 ~ 60℃
Relative humidity 5 ~ 90% non-condensing

Resources

Program examples/Start-up

Software

Firmware

Product information

Certificates