BSD-FFP55DMK-4
Servo motor
- 400 VAC, 5.5 kW
- 180mm flange, 35mm shaft, 26.25/78.76Nm, 2000/3000rpm
- Absolute 19 bit multi turn encoder (524288 ppr)
- Medium inertia
Facts
General description
Article number | 71226 |
Warranty | 1 year |
Applicable drive | L7xB050-4 |
Mechanical
Inertia | 73.85 kg•cm² |
Flange size | 180 mm |
Shaft diameter | 35 mm |
Shaft type | Keyed |
Maximum shaft axial force | 1548 N |
Maximum shaft radial force | 519 N |
IP Class | IP65 (exkluding shaft penetration) |
Weight | 25.2 kg |
Ambient conditions
Environment | Avoid direct sunlight, no corrossive gas, inflammable gas, oil mist or dust |
Humidity | 90% RH or less (no condensation) |
Temperature range | Operating: 0 to 40 C°, Storage: -10 to +60 C° |
Vibration | 5G |
Brake
Holding brake | No |
Holding torque | 40 Nm |
Brake coil voltage | 24 VDC |
Brake coil current | 1.04 A |
Encoder
Encoder type | Absolute multi-turn 19bit (524288ppr) |
Output ratings
Rated power | 5.5 kW |
Rated speed | 2000 rpm |
Rated torque | 26.25 Nm |
Maximum torque | 78.7 Nm |
Tuning
Allowed load inertia ratio | 5 times motor inertia |
Standard compliances
Applied directives | EMC Directive: EN 60034-1:2010 Low Voltage Directive: EN 60034-5:2001 + A1:2007 |