BSD-FEP15AMK2-4
Servo motor
- 400 VAC, 1.5 kW
- 130mm flange, 19mm shaft, 4.77/14.32Nm, 3000/5000rpm
- Absolute 19 bit multi turn encoder (524288 ppr)
- Low inertia
- Brake
Facts
General description
| Article number | 71242 |
| Warranty | 1 year |
| Applicable drive | L7xB020-4 |
Mechanical
| Inertia | 10.179 kg•cm² |
| Flange size | 130 mm |
| Shaft diameter | 19 mm |
| Shaft type | Keyed |
| Maximum shaft axial force | 725 N |
| Maximum shaft radial force | 362 N |
| IP Class | IP65 (exkluding shaft penetration) |
| Weight | 8.3 kg |
Ambient conditions
| Environment | Avoid direct sunlight, no corrossive gas, inflammable gas, oil mist or dust |
| Humidity | 90% RH or less (no condensation) |
| Temperature range | Operating: 0 to 40 C°, Storage: -10 to +60 C° |
| Vibration | 5G |
Brake
| Holding brake | Yes |
| Holding torque | 10.4 Nm |
| Brake coil voltage | 24 VDC |
| Brake coil current | 0.81 A |
Encoder
| Encoder type | Absolute multi-turn 19bit (524288ppr) |
Output ratings
| Rated power | 1.5 kW |
| Rated speed | 3000 rpm |
| Rated torque | 4.77 Nm |
| Maximum torque | 14.32 Nm |
Tuning
| Allowed load inertia ratio | 10 times motor inertia |
Standard compliances
| Applied directives | EMC Directive: EN 60034-1:2010 Low Voltage Directive: EN 60034-5:2001 + A1:2007 |
